Compressor
Selected tag
Tag Selection
- Portable Screw Air Compressor
- Rotary Twin Screw,Single Stage,Oil-Cooled
- Free Air Delivery 5m3/min
- Rated operating Pressure 7kg/cm2 or 100 psig
- Air Receiver Tank 0.048m3(12.7 US gal)
- Driven by ISUZU C240 engine
- Total weight 1020 kg
Description
Low Fuel Consumption
- Energy conservation through power steering fluid regulation according to load burden on the rear axle when forklifts are equipped with load-sensing power steering.
- Optimal drive power with no gear change achieved by 2-stator torque convertor and transmission helps minimize fuel consumption.
More Details...
Description
Productivity
- Good visibility of the forks achieved by wide view mast gives an accurate handling of the machine
- Increased maneuverability in tight turning radius by synchronizing steering wheel and angle of rear steered wheels
Durability
- Available in Diesel and LPG/Petrol models to suit your
More Details...
Description
The Genie® GS™-4390 RT rough terrain scissor lift features four-wheel drive and positive traction control — giving it up to 50% gradeability when driving on slopes. This tough, construction-oriented machine is built to tackle the most rigorous jobsite conditions.
More Details...
Description
The Genie® GS™-2669 RT rough terrain scissor lift is a tough, construction-oriented four-wheel drive machine with positive traction control, which can increase operator productivity on demanding outdoor worksites.
More Details...
Description
Genie® S®-45 telescopic booms increase productivity with the traction and drive speed needed to get around jobsites and work areas. These units are designed to easily maneuver in tight spaces on construction and industrial sites.
More Details...
Description
Genie® S®-80 XC™ telescopic booms offer a dual lift capacity of 660-lb (300 kg) unrestricted and 1,000-lb (454 kg) restricted to perform a wider range of heavier lift tasks on construction and industrial jobsites.
More Details...
Description
The KTZ-series is a submersible three-phase cast iron high head heavy-duty drainage pump. The cast iron body with high-chromium cast iron impeller enables it to withstand demanding conditions found in construction, aggregate and mining applications.
More Details...
TOKU TSLP-150 6” Sludge Pump specially designed to handle clean or dirty water containing limited solids, and mostly use extensively on construction sites for dewatering.
TSLP-150 is automatic priming and re-priming, is by flood lubricating rotary sliding vane vacuum pump.
- High capacity water pump, used for Well Point dewatering and sump pumping.
More Details...
Characteristics
- Emergency inflatable light tower 3 meters height.
- Light weight, Foldable & portable.
- Takes just 30 seconds to inflate and 3 minutes to achieve its best illumination level.
- Easily operated by an individual and transported in the trunk of a mini van or SUV.
- 200W Metal halide Lamp 36000lumin.
More Details...
Characteristics
- Emergency inflatable light tower 5meters or 7meters folded.
- Light weight, Foldable & portable.
- Takes just 30 seconds to inflate and 3 minutes to achieve its best illumination level.
- Easily operated by an individual and transported in the trunk of a mini van or SUV.
More Details...
Specification
Model
TDH6505
Lamps
4 x 400 watts
Rated Frequency
50Hz
Rated Output
4500W
Max.
More Details...
Specifications
Breaker Type
Standard
Breaker Version
Silenced
Weight
43 kg
Length
710 mm
Air Consumption
40 l/s
Impact Tate
1 260 blows/min
Vibration level 3 Axes (ISO
More Details...
We specialize in being a trusted supplier of top-notch construction equipment and machinery. Our dedication to providing high-quality equipment, coupled with exceptional customer service, ensures that our clients have the tools they need to successfully complete their projects on time and with efficiency.
With a focus on innovation and quality, we strive to be at the forefront of the industry, providing solutions that enhance the productivity and success of our clients. Whether you are involved in residential, commercial, or industrial construction, our range of equipment and machinery is designed to meet your requirements and contribute to the success of your projects. Please contact us if you wish to know more about Bar Cutter.
We specialize in being a trusted supplier of top-notch construction equipment and machinery. Our dedication to providing high-quality equipment, coupled with exceptional customer service, ensures that our clients have the tools they need to successfully complete their projects on time and with efficiency.
With a focus on innovation and quality, we strive to be at the forefront of the industry, providing solutions that enhance the productivity and success of our clients. Whether you are involved in residential, commercial, or industrial construction, our range of equipment and machinery is designed to meet your requirements and contribute to the success of your projects. Please contact us if you wish to know more about Bar Bender.
Specification
Weight
13 t
Transport length
5.75 m
Transport width
2.3 m
Transport height
2.835 m
Travel speed
10 km/h
Frequency
36.
More Details...
Specification
Weight
12.05 t
Transport length
5.785 m
Transport width
2.3 m
Transport height
2.85 m
Travel speed
10 km/h
Frequency
36.
More Details...
Specification
Weight
10.85 t
Transport length
5.76 m
Transport width
2.3 m
Transport height
2.825 m
Travel speed
10 km/h
Frequency
36.
More Details...
Specification
Weight
10.5 t
Transport length
5.74 m
Transport width
2.3 m
Transport height
2.82 m
Travel speed
10 km/h
Frequency
36.
More Details...